1

 

21.07.2022

Solid carbide end mills

Professional solid carbide cutters for aluminium machining 

The all-new ALSP series is a highlight from the current tool development at WEDCO. These solid carbide cutters have been specially designed for roughing and finishing in aluminium materials with up to 12% Si content. For example, the flute chip spaces have been specially adapted for aluminium machining in order to handle a maximum of chips. Special chip breakers on the cutting edge also ease the removal of chips from the cutting zone.

A completely new DLC coating is used for the highest possible wear resistance. What catches the eye at first glance with its iridescent play of colours is simply a particularly effective coating technology that gives the tool an especially precise and sharp cutting edge with a very low coating thickness – ideal for non-ferrous machining. A special characteristic is the high hardness of approx. 6000 HV – that´s about twice as hard as conventional PVD coatings and thus enables the extremely high performance of these cutting tools.

With a hardness of approx. 6,000 HV, the new DLC coating is about twice as hard as conventional PVD coatings. Special chip breakers on the cutting edge ease the removal of chips from the cutting zone.

 

Click here for the ALSP in our webshop

 

 

Vorheriger Artikel
Nächster Artikel